Aircotec Xc trainer
 

Instruments

XC Trainer Dual; Alti-Vario-GPS combo

The new generation...

  • Vario
  • Altimeter
  • Data logger
  • 16 channel GPS
  • Flight area visualisation
  • 10 position marks
  • Track / bearing
  • Speed / courseT
  • hermal visualisation
  • Thermal centring support
  • Wind direction
  • Wind speed
  • Time
  • Barogram
  • Temperature gradient
  • Average climb rate
Xc trainer Dual
The Aircotec XC Trainer Dual has two sensors (Dual sensors) with an extra sensitive sensor for increased sensitivity.

Easy To Repair Modular Hi-Tech Flight Instruments

Modular technology makes the unit repairable by yourself...
  • All elements screwed
  • No soldering
  • No glue required

Xc trainer

Aircotec XC Trainer Dual : Technical Specifications

Altitude

  • -1000m to +8200m
  • Resolution 0,1m
  • At launch the GPS module provides an automatic altitude setting (AMSL)
Vario
  • Digital indication from –25.5m/s to +25.5m/s
  • Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s.
  • Acoustic signal for climbing initiates at +0.1m/s. This may be switched off
  • Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s
Speed
  • 0 – 160km/h
  • Total-Energy-Compensation (TEC) 0 – 90%
  • Only with speed sensor connected (Speed sensor is not included)
Temperature
  • The sensor is placed on the right hand side of the instrument.
  • The sensor measures in centigrade from –25 to +75 degrees
  • Resolution 0.1 degrees
GPS receiver
  • 16 channel parallel
  • 2D / 3D position (WGS84)
  • Altitude
  • Speed
  • Direction
  • Internal aerial
Data Transfer protocols
  • Serial
  • Cable
  • Infrared
Clock
  • Flight recording in UTC
  • Display shows local time and elapsed time since launch
Memory
  • Flight data: 1MB flash, 184 in the circular buffer
  • Waypoints: 4KB flash for 224 waypoints
Power supply
  • Rechargeable Li-Ion 3.7V/1200mAh
  • Operating time per charging approx. 15 hours
  • Power consumption 75 mA
The instrument is equipped with an “intellicharge” system.

To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand.

Dimensions & Weight
  • Dimensions: 137mm x 66mm x 28mm
  • Weight (including battery): 150g
XC-Trainer / XC-Trainer Dual : Upper Display Description

Xc trainer dual
  1. Ratio left/right thermaling
  2. Wind direction
  3. Windspeed
  4. Groundspeed (SOG)
  5. Altitude
  6. Climb/sink rate
  7. Vario acoustic signal volume
  8. Heading (COG)
  9. Speed distribution curve beneath the wind rose and the SOG bar
XC-Trainer / XC-Trainer Dual : Complete Display Description

XC trainer dual

  1. Low battery symbol
  2. TAS (True Airspeed)
  3. Resolution
  4. Pilot position
  5. Heading indicator
  6. Position Mark symbol
  7. Waypoint symbol
  8. WPT cylinder depiction
  9. Distance to chosen WPT, MARK or to the launch
  10. Flashing indication pointing to the chosen WPT or MARK
  11. Local time
  12. Track
Aircotec XC-Trainer Dual : Package
  • Aircotec XC-Trainer Dual
  • Bag
  • Power cable
  • PC cable

EMAIL us for prices